2012.25 Released!

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Version 2012.25 has just been released!
Fixed:
Set Pin 1 and Renumber Pins bug resolved.
Problem fixed to allow proper creation of 2-pin SIP.
Naming Convention for Polarized Axial Capacitors is missing “P” CAPPAD
TH Radial Disk footprint name was corrected.
TH Radial Electrolytic Capacitor added to FPX assigned the proper Radial Dipped Round component family.
All SO parts with pin pitch greater than 1 mm Footprint Name are now SOIC (not SOP).
Hide/Delete pins in DIP component family now functions as expected.
For EAGLE output, rotation for thermal tabs with slightly rounded corners now works as expected.
Thermal Tabs with a very small slightly rounded corners now translate properly.
Any conflicts with similar padstacks as a result of slightly rounded corners for thermal tabs have been resolved.
NEW:
The Footprint Expert now has P-CAD support!

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Nick B Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 02 Jan 2012 Status: Offline Points: 1908	Post Options Post Reply Quote Nick B Report Post Thanks(0) Quote Reply Topic: 2012.25 Released! Posted: 15 Oct 2012 at 3:51pm
	Version 2012.25 has just been released! Fixed: Set Pin 1 and Renumber Pins bug resolved. Problem fixed to allow proper creation of 2-pin SIP. Naming Convention for Polarized Axial Capacitors is missing “P” CAPPAD TH Radial Disk footprint name was corrected. TH Radial Electrolytic Capacitor added to FPX assigned the proper Radial Dipped Round component family. All SO parts with pin pitch greater than 1 mm Footprint Name are now SOIC (not SOP). Hide/Delete pins in DIP component family now functions as expected. For EAGLE output, rotation for thermal tabs with slightly rounded corners now works as expected. Thermal Tabs with a very small slightly rounded corners now translate properly. Any conflicts with similar padstacks as a result of slightly rounded corners for thermal tabs have been resolved. NEW: The Footprint Expert now has P-CAD support!