Print Page | Close Window

Question about Oscillator, L-Bend definition

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=957
Printed Date: 06 Oct 2024 at 12:20pm


Topic: Question about Oscillator, L-Bend definition
Posted By: KoryJ
Subject: Question about Oscillator, L-Bend definition
Date Posted: 05 Jun 2013 at 9:46am
Hi.

Is the value for E2 supposed to be the NOM dimension for the center of the contact surface on the lead/pin?  I am using this land pattern, not for an oscillator, but for an LED that has "L" leads ( http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/HB/Data%20Sheets/CLP6CFKB%28933%29.pdf" rel="nofollow - http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/HB/Data%20Sheets/CLP6CFKB%28933%29.pdf - see sheet 7).  It is not entirely clear if this is for the body or leads.

Kory


Replies:
Posted By: Tom H
Date Posted: 05 Jun 2013 at 12:10pm
Yes, the red * (required entry) is located in the "Nominal" column.
 


Print Page | Close Window