Print Page | Close Window

Export to Diptrace

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=901
Printed Date: 19 Nov 2024 at 4:33am


Topic: Export to Diptrace
Posted By: dwaltoneng
Subject: Export to Diptrace
Date Posted: 25 Mar 2013 at 3:16am
Not all pads in a component are transferred to a Diptrace component.
If I select a QFN part (eg PQFN50P500X500X40-33) and click on "Build Selection" to create a library and import this into the Diptrace Pattern Editor, I only get the top and bottom rows of pads. The pads on the sides and the thermal pad are not imported.
I have just used the defaults when building the library. I have tried building to other PADS formats, but this did not change anything noticeable.
I am using version 2.3.1.0 of Diptrace.

Does anyone have any suggestions?


Replies:
Posted By: dwaltoneng
Date Posted: 27 Mar 2013 at 2:52pm
This turned out to be a bug in DipTrace.
 
See here http://www.diptrace.com/forum/viewtopic.php?f=5&t=9060&p=13765#p13765" rel="nofollow - http://www.diptrace.com/forum/viewtopic.php?f=5&t=9060&p=13765#p13765
 
Also only PADS ASCII import from 2005 and 2007 has been tested with DipTrace.

Posted By: andy123
Date Posted: 21 Sep 2013 at 2:42am

I would like to thank you for sharing such a great info with us                                                                                                                              

                                                                                                


Print Page | Close Window