How to make a batch output an alternative.
Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: CADSTAR
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=726
Printed Date: 25 Nov 2024 at 1:09am
Topic: How to make a batch output an alternative.
Posted By: Matthew Lamkin
Subject: How to make a batch output an alternative.
Date Posted: 03 Dec 2012 at 9:06am
|
Just a tip for those CADSTAR usersthat want to be able to batch output parts in Least, Nominal & Maximum dimensions and have a single component name but each different sized version of it as an alternative footprint. (This is so that it can easily be selected within a design and changed I.E. when going from a prototype with Maximum to Least for production etc). Output your batch with the environment setting as required and the component name will have L, N or M at the end of it. Open the .CPA file within notepad and use search and replace for the following. The text to search/replace is within the quote. Least Find
Nominal Find
Maximum Find
And save the .cpa file and import as usual. Then you will get alternatives for each output. |
L" ""