FIXED:

• Updated DefaultPreferences.dat file. Users should manually delete UserPreferences.dat and auto-generate a new one.
• PADS - PADS ASCII variations now output properly
• PADS - Alphanumeric pin mapping in the Decal
• Preferences - Height in Footprint Name
• General - Rounded Square pads now translate properly
• CAD Interface - Tab order of the Translator dialog is fixed
• Library Editor - cut/paste for replace all is replacing everything in a cell
• Header component family - Dimension 'b' missing from pictures
• Pin 1 shape not reflecting selected shape when pin 1 is moved by reorder pins
• Made extensive changes to code that assigns pin shapes
• Reading and fpx file without a datasheet column into a library with a datasheet column causes an 'error reading' message
• Pin Mapping is always present in the PADS Part Type regardless of user choice
• Link associated with part loaded into library gets lost
• Applied Environment gets changed whenever a calculator button (SMD or TH) is clicked but then canceled causing return to a different part than originally built
• Applied Environment doesn't display the user preference when SMD or TH button is clicked

NEW:

• Added User Preference instructions to “User Guide” - http://www.pcblibraries.com/products/fpx/userguide/default.asp?ch=7" rel="nofollow - http://www.pcblibraries.com/products/fpx/userguide/default.asp?ch=7
• Added Training Forum Link to Help > About
• Through-hole component family – Flange Mount Vertical and Horizontal (TO-220)
• Through-hole component family – TO Cylindrical
• Updated 2-Sided Chip Array maximum pin quantity from 10-pins to 16-pins
• Support for PADS V9.5