Footprint For Chip Type Crystal
Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=632
Printed Date: 22 Nov 2024 at 2:05am
Topic: Footprint For Chip Type Crystal
Posted By: chads108
Subject: Footprint For Chip Type Crystal
Date Posted: 25 Oct 2012 at 12:03pm
|
I have a crystal that more resembles a chip type component than the crystal component in Footprint Wizard. It actually has concave corners like an oscillator, but only has 2 pins - http://www.abracon.com/Resonators/ABS07.pdf" rel="nofollow - http://www.abracon.com/Resonators/ABS07.pdf How would you handle this situation? |
Replies:
Posted By: Tom H
Date Posted: 25 Oct 2012 at 12:21pm
This is a new component family. 2-pin Corner Concave Crystal. I would use the mfr. recommended pattern.  |
Posted By: chads108
Date Posted: 25 Oct 2012 at 12:23pm
| What about a naming convention for this? Do you forsee there being something specific for this? |
Posted By: Tom H
Date Posted: 25 Oct 2012 at 12:31pm
|
For right now I would call it - XTAL_ABRACON_ABS07 There is no IPC standard for this package yet. The 1st sort in the library would be on the component family, then the Mfr. and then the part number. |