Print Page | Close Window

Name footprint for THT part

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Allegro
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=41
Printed Date: 21 Nov 2024 at 11:22pm


Topic: Name footprint for THT part
Posted By: Angeline
Subject: Name footprint for THT part
Date Posted: 26 Apr 2012 at 8:34pm
Hi
   Is there any documentation for naming the through hole parts? I have a part which is a MINI PCI EXPRESS CONNECTOR LATCH: 1717832-2_C1 of TE Connectivity. How to name its footprint? Can advise as soon as possible? Thanks.  



Replies:
Posted By: Tom H
Date Posted: 26 Apr 2012 at 10:18pm
Most connectors are one-of-a-kind but even if they're not, there are slight differences in "Standard" connectors. We recommend a simple name that includes the "Manufacturer Name_Mfr Part Number"
 
Samples:


AGILENT = AGILENT_Part Number

AIRBORNE = AIRBORNE_Part Number

AMPHENOL = AMPHENOL_Part Number

AVX = AVX_Part Number

BERG = BERG_Part Number

BLOCKMASTER ELECTRONICS = BLOCKMASTER_Part Number

CUI-STACK = CUI-STACK_Part Number

E.F. JOHNSON = JOHNSON_Part Number

ERNI = ERNI_Part Number

FCI ELECTRONICS = FCI_Part Number

FUJITSU = FUJITSU_Part Number

HARTING = HARTING_Part Number

HIROSE = HIROSE_Part Number

IEH = IEH_Part Number

ITT =  ITT_Part Number

JALCO = JALCO_Part Number

JWT = JWT_Part Number

JST = JST_Part Number

KEYSTONE = KEYSTONE_Part Number

KYCON = KYCON_Part Number

LEMO = LEMO_Part Number

MILL-MAX = MILL-MAX_Part Number

MOLEX = MOLEX_Part Number

NEUTRIK = NEUTRIK_Part Number

PHOENIX = PHOENIX_Part Number

PULSE = PULSE_Part Number

RIA = RIA_Part Number

SAMTEC = SAMTEC_Part Number

SIEMENS = SIEMENS_Part Number

SPEEDTECH = SPEEDTECH_Part Number

STEWART = STEWART_Part Number

SULLINS = SULLINS_Part Number

SWITCHCRAFT = SWITCHCRAFT_Part Number

TE CONNECTIVITY = TE_Part Number

YAMAICHI = YAMAICHI_Part Number



Posted By: Angeline
Date Posted: 03 May 2012 at 7:40pm

Thanks for the reply. Smile



Posted By: muthu
Date Posted: 20 Aug 2012 at 5:40am
Use IPC standards for naming structures.


Posted By: Tom H
Date Posted: 20 Aug 2012 at 7:57am
There are no IPC Standards for "non-standard component packages" and most Connectors fall into that category.
 


Posted By: muthu
Date Posted: 22 Aug 2012 at 12:31am
Thanks Tom!




Print Page | Close Window