11-pin TO-220 Vertical
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3383
Printed Date: 21 Nov 2024 at 10:26pm
Topic: 11-pin TO-220 Vertical
Posted By: evan.cornell
Subject: 11-pin TO-220 Vertical
Date Posted: 24 Apr 2024 at 12:32pm
|
I am making footprint for LM3886 (https://www.ti.com/lit/ds/symlink/lm3886.pdf). Attached is my footprint expert setting:  And here is the picture of the actual part:  You'll note that the odd pins are further away from the body of the device, unlike the generated footprint. Unfortunately TI have not provided a recommended footprint for this package (package code NDA0011B), so I can't just use footprint Designer. Is there a way on the TO220 to swap which pins are furthest from device body?
|
Replies:
Posted By: Tom H
Date Posted: 24 Apr 2024 at 3:26pm
|
Swap "D" and "D1" dimensions. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: evan.cornell
Date Posted: 24 Apr 2024 at 4:58pm
|
That worked for the footprint although the 3D model looks very strange. Not a problem, as I was able to find that thru TI's site. |