Print Page | Close Window

Chip resistor: L & L1 dimensions

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3036
Printed Date: 22 Nov 2024 at 4:34am


Topic: Chip resistor: L & L1 dimensions
Posted By: zentekfr
Subject: Chip resistor: L & L1 dimensions
Date Posted: 20 Jan 2022 at 7:29am
Hello.

I'm in the process of building a 0603 chip resistor with Footprint Expert v2021.21 .
Could you please advise which one of L or L1 dimension is the one on the solder side? From the datasheets I'm studying, they give both but the names are different (a & b or T1 and T2). I've searched the documentation but found nothing relevant.

Thanks.
Justin



Replies:
Posted By: Tom H
Date Posted: 20 Jan 2022 at 9:19am
L1 is in case the manufacturer makes pin 2 a different size. 

Doesn't make too much sense on why they would do that, but some do make L and L1 different values. 

We just cover all the bases. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Posted By: zentekfr
Date Posted: 20 Jan 2022 at 9:27am
So this is not related to the top vs. bottom dimensions difference.
Understood, thanks!



Print Page | Close Window