Print Page | Close Window

The better location for pattern origin

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2620
Printed Date: 22 Nov 2024 at 3:49am


Topic: The better location for pattern origin
Posted By: Batiskaff
Subject: The better location for pattern origin
Date Posted: 09 Apr 2020 at 2:53am
I draw the footprint for https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=146274&DocType=Customer+Drawing&DocLang=English" rel="nofollow - https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=146274&DocType=Customer+Drawing&DocLang=English
I try to choose the place i will locate the pattern origin.
I usually set the origin in center.
Library Expert uses pin 1 for connectors by default.
Please, advice me the better solution, center or pin 1?


Replies:
Posted By: Tom H
Date Posted: 09 Apr 2020 at 8:21am
If you are using Library Expert Enterprise you can permanently change the Header Calculator origin to be in the Center. 

Preferences > Components > Through-hole > Header > Origin > Pin 1 or Center of Extents or Center of Pins

If you are using Library Expert Pro you must select the "Settings" tab and change the Origin for every part manually and then select the "OK" button. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window