Print Page | Close Window

How To Name Card-Edge Connector Footprints?

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2602
Printed Date: 25 Nov 2024 at 12:58am


Topic: How To Name Card-Edge Connector Footprints?
Posted By: SDTKO
Subject: How To Name Card-Edge Connector Footprints?
Date Posted: 05 Feb 2020 at 10:21am
Hi,

is there a convenient way to name the mating card footprint of a card edge connector?

The connector itself would be named <Mfg>_<Mfg Partnumer>, of course.
But how to name the footprint of the mating card, given that both names can't be identical?

Regards


Replies:
Posted By: Tom H
Date Posted: 05 Feb 2020 at 10:37am
We're having the same problems with this issue on POD. 

Add the word "Mate" to the footprint name and Physical and Logical Descriptions. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window