Print Page | Close Window

3 Terminal Capacitor by Murata

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Allegro
Forum Description:
URL: http://www.PCBLibraries.com/forum/forum_posts.asp?TID=2479
Printed Date: 29 May 2024 at 5:40am


Topic: 3 Terminal Capacitor by Murata
Posted By: jaog
Subject: 3 Terminal Capacitor by Murata
Date Posted: 07 May 2019 at 10:18am
Hello, 

I want to create the EMIFIL chip 3 terminal capacitor footprint for Murata NFM18PC225B1A3 in Library Expert Enterprise Edition.

can you tell me what surface mount category I should start with? 

I can't seem to see anything that would work.

Thanks!
Jackie



Replies:
Posted By: Tom H
Date Posted: 07 May 2019 at 10:51am
Start with the Chip Calculator and then move the part to FP Designer to add Pin 3 (the middle pad). 

In FP Designer select the Pad Stack Manager and then "New" to create a new pad stack. 

Save to FPX in the Finish tab. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Posted By: jaog
Date Posted: 07 May 2019 at 10:54am
Thanks Tom! I'll try it.


Posted By: Tom H
Date Posted: 07 May 2019 at 11:04am
There are 13 videos on how to use FP Designer in "Help > Topic > Contents > FP Designer"



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn



Print Page | Close Window