http://www.pcblibraries.com/downloads" rel="nofollow -

FIXED:

• Calculator:
• Fixed an issue in the PQFN component family for parts under 1.60 mm in length, the incorrect terminal type was used
• Fixed 2 issues in the PSON component family:
• When Pin 1 was longer than the other pins, it caused the solder mask to swell for violating the Minimum Solder Mask Spacing Rule
• For parts under 1.60 mm in length, the incorrect terminal type was used
• Altium:
• Fixed an issue with generating pads that are both rotated and offset
• Script Naming will now allow you to use a period “.” in the name of your footprint and still have it generate that way in Altium
• EAGLE:
• Fixed a problem that could cause the first point to be called out twice for a polygon. This was causing an error to be thrown in Eagle, which will now go away.
• Pantheon:
• Adjusted the Attributes to remove @coord which was not being recognized
• 3D STEP:
• Fixed a conversion issue with off-unit (anything but mm) model output. This issue was primarily with TO-92 parts.