Print Page | Close Window

Bottom Mask for Eagle Parts

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1712
Printed Date: 07 Oct 2024 at 5:22pm


Topic: Bottom Mask for Eagle Parts
Posted By: SteveD
Subject: Bottom Mask for Eagle Parts
Date Posted: 16 Jun 2015 at 3:30pm
I have a bunch of dip parts that I copied from the TH.fpx.  I translated them to Eagle back in late February.  I was just checking the pad stacks in Eagle and I noticed that the solder mask on the bottom of the board for these parts does not show up on the bStop layer in Eagle with all layers turned on.
 
Is this a known problem?


Replies:
Posted By: chrisa_pcb
Date Posted: 16 Jun 2015 at 7:17pm
This should be fixed if you translate them using the latest version.

Posted By: Tom H
Date Posted: 16 Jun 2015 at 7:23pm
Download V2015.15 pre-release here - http://www.pcblibraries.com/downloads" rel="nofollow - www.pcblibraries.com/downloads
 
You might need to reprocess your DIP library parts.
 
We made updates to the Eagle interface and cleaned up some bugs.
 
We stopped adding new features and are 100% focused on fixing every bug in Library Expert V2015.
 


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window