Print Page | Close Window

Information On How To Use The Pad Stack Manager

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1500
Printed Date: 23 Nov 2024 at 6:34am


Topic: Information On How To Use The Pad Stack Manager
Posted By: lalexman
Subject: Information On How To Use The Pad Stack Manager
Date Posted: 12 Dec 2014 at 1:44pm

Is there any information on how to use the pad stack manager. I cannot figure out how the pins fields work.




Replies:
Posted By: Tom H
Date Posted: 12 Dec 2014 at 2:37pm

The pins in the pin field will not appear until you place all the pad stacks.

Then you will see what pin number is associated with each pad stack.

Then you can reassign pins to different pad stacks.




-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: lalexman
Date Posted: 12 Dec 2014 at 2:55pm

Can you please elaborate on how you do that exactly. There is a Add pins button, A <<< button and a cancel add button. How do each of those buttons work to add or reassign pins ? I have tried but the pins never seem to stay the way I want  them when I click ok.


Posted By: Tom H
Date Posted: 12 Dec 2014 at 3:17pm

Select any pad stack and then select "Add Pins" and then select the pins you want to assign to that pad stack and select <<<. Then select "Cancel Add" and OK when you are finished.

You will see the new pad stack assignments in the footprint.




-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window