Print Page | Close Window

Mounting Hole Gap?

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1450
Printed Date: 07 Nov 2024 at 8:32pm


Topic: Mounting Hole Gap?
Posted By: dannicholson
Subject: Mounting Hole Gap?
Date Posted: 21 Oct 2014 at 5:20am

For a non-plated mounting hole with vias, how do I change the gap between the annular ring and the non-plated drill?

Is there a setting to make the gap wider?


Thanks


Replies:
Posted By: Jeff.M
Date Posted: 21 Oct 2014 at 12:44pm
I'm assuming you mean for the anti-pad?
If you're using the 'proportional' fabrication level there is no available adjustment.
In the 'User' Fab level you can set all aspects of the pad stack.
This will change in the next software version where 'proportional will be the only method for both user and default but all controlling values will be available.


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window