Pad Stack Always X Exceed Y
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Product Suggestions
Forum Description: request new features
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1434
Printed Date: 25 Nov 2024 at 10:09am
Topic: Pad Stack Always X Exceed Y
Posted By: PLTcbv
Subject: Pad Stack Always X Exceed Y
Date Posted: 25 Sep 2014 at 4:58am
|
When building a Oscillator Corner Concave. In the generated padstack the Y width exceeds the X width and has a 270 degree rotation.  The pad could better be generated with a 0 degrees rotation and a X width exceeding the Y width. This keeps the Pad Stack Library cleaner with less entries. Regards, Wim.
|
Replies:
Posted By: Tom H
Date Posted: 25 Sep 2014 at 10:39am
|
In our tool
it doesn’t matter. Pin orientations will change with part re-orientation.
Things like this are cleaned up when converted to the target CAD tool format. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: PLTcbv
Date Posted: 26 Sep 2014 at 12:13am
|
This is the default view when making a part. The pad orientation is "270" and should be "0". If you use the Padstack Designer you can't create an offset in the Padstack when Y exceeds X. So i.m.o. always let X exceed Y. If you convert to Expedition ASCII out rotations are not cleaned up. So we have one pad with orientation "0" and one pad with "180"
|