Print Page | Close Window

Through Hole Part Has Stencil Info in Pad Stack

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1431
Printed Date: 07 Nov 2024 at 7:33pm


Topic: Through Hole Part Has Stencil Info in Pad Stack
Posted By: PLTcbv
Subject: Through Hole Part Has Stencil Info in Pad Stack
Date Posted: 25 Sep 2014 at 1:37am
If I create a Through Hole part with the LE Lite 2014.11 and do an Expedition ASCII out the part gets stencil information in the Padstack.

Maybe this is because it is marked as Surface mount.

Stencil Width can be selected in the terminal window when building a part.



For normal Through Hole parts this is not necessary.
Only for PIP (Pin In Paste) parts.
Please make it selectable to switch it on/off.

Wim.



Replies:
Posted By: Tom H
Date Posted: 25 Sep 2014 at 10:50am

The Through-hole pad stack defaults to No Paste Mask.

However, if you want Paste Mask for "Pin-In-Paste" technology, simply add a Paste Mask value.




-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Posted By: PLTcbv
Date Posted: 26 Sep 2014 at 12:20am
This is the default and it creates a Paste Mask.
This is in Library Expert Lite 2014.11



Print Page | Close Window