Print Page | Close Window

Add Solder Mask definition for Flex IPC-2223 Printed From: PCB Libraries Forum Category: PCB Footprint Expert Forum Name: Product Suggestions Forum Description: request new features URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1418 Printed Date: 21 Nov 2024 at 10:47pm Topic: Add Solder Mask definition for Flex IPC-2223 Posted By: tboyer Subject: Add Solder Mask definition for Flex IPC-2223 Date Posted: 09 Sep 2014 at 11:28am Maybe not what allot of companies are dealing with but to design a pattern for the Flex of a Flex board or Rigid-Flex board requires modifying the solder mask in such a way that your software currently cannot build to. See figure 9 of IPC-2223. I think this would save me valuable time because I currently have to use the software to create the pattern then go into Layout pattern tool and modify the pad and solder mask. Then leave a note in the library that this pattern was modified for Flex. how it was modified and what it looks like is only visible through the Layout tool.

Print Page | Close Window