Print Page | Close Window

4-Pin DFN Pin Reorder

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1203
Printed Date: 19 Nov 2024 at 2:28am


Topic: 4-Pin DFN Pin Reorder
Posted By: lalexman
Subject: 4-Pin DFN Pin Reorder
Date Posted: 08 Dec 2013 at 8:01am

Hi,

I tried to renumber pins on a DFN 4 pin and it states us pin reorder.

Where is the pin reorder command?


Replies:
Posted By: Jeff.M
Date Posted: 09 Dec 2013 at 10:58am
This is a bug  for 3 and 4 pin DFN's.

-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: Andre.Mylle
Date Posted: 06 Jan 2014 at 9:37am
Hi,
For DFN, I note this:
1. For 3,4-pin DFN: whatever I put as Orientation in the component settings Up or Left, pin1 appears on the opposite side.
2. In the setup, there is no distinction on orientation for 2-pin DFN and 3,4-pin DFN devices.
I think this is incompatible with the zero orientations from IPC7351C, lev A or B.

Is this the same bug?
Version 013.17

Posted By: Jeff.M
Date Posted: 06 Jan 2014 at 12:13pm

This is new.  

The default orientation for the 3 pin DFN appears to be 180 degrees off.

The others look OK though.
 


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window