Library Expert 2014.06 Released!!

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Version 2014.06 was just released!!

NEW:
Calculator
Ability to set tab stops for entering dimensions in either nom/tolerance or min/max
New Component Families
Side Concave Inductors
DFN 2-Pin Fuse
Updated Toe Solder Joint Goals for Chip component less than 1.6 mm in length per the upcoming IPC-7351C
0402 Toe is now set to 0.15 mm
0201 Toe is now set to 0.12 mm
01005 Toe is now set to 0.10 mm
Updated Periphery Solder Joint Goals for DFN component less than 1.6 mm in length per upcoming IPC-7351C
Periphery Goal for these micro-miniature bottom only terminal packages is now set to -0.04 mm
FP Designer
Offset slotted holes
Side Chamfered Rectangle Pads that are new in the Pad Stack Designer now export to CAD tools properly
Issue related to the offsetting of pads. It should now translate properly the new offset functionality in the Pad Stack Designer.
New FPXC to CAD Translator
Added 3D STEP model output from FPXC files from the translator as an extruded block
PADS to CAD was changed to FPXC to CAD. Now converts our new neutral library format to any CAD tool.
FPXC to CAD now has a new Viewer to visually see the footprint features prior to importing it into their library
FPXC to CAD was relocated from the Main Toolbar to the “Utility Tools” drop down
3D STEP
Added models for new family Inductor, Side Concave 2 and 4 pin. Also added a model for new Family DFN 2-pin Fuse.
Parts on Demand (POD)
Added 17,000+ new parts
Allegro/OrCAD PCB
The ability to turn off the truncation of land pattern names is now available. Only use this if your version of Allegro or OrCAD PCB supports land pattern names longer than 30 characters.
The grid change line in the pad stack creation is no longer applicable and useless(it previously caused an irrelevant error in the .jrl file that was ignored and did nothing). As such, it has been deprecated.
PCAD, Pulsonix, and DesignSpark
These 3 formats now only accept numeric layers and should be more understandable, as the LIA format they’re based on was never designed to actually accept custom strings as layer names. The LayerNumRef literal that was used in the Layer String is now automatically inserted any time a layer number is called out in the output.
PADS
VX is now supported as a PADS output
PADS ASCII: When using a Part Type Name that is different from the Part Decal Name, the program will now properly use the Part Type Name rather than the Part Decal Name when calling out the Part in the .ASC
Altium
PADS ASCII files for Altium will be generated without use of PADS arcs. Instead, it will describe the arc as a series of points in the polygon. This should cause the D-Shapes and other such pads that use associated copper to render properly.

FIXED / ENHANCED:
Calculator
Updated ability to Solder Mask Define Thermal Pads
FP Designer
Issue with Courtyard Excess to Pad clearance now works correctly
3D STEP
Issue with the DIP leads that was causing them to not hit their exact location properly
Replaced the DIP body that had some slight plane issues, with a clean model
QFP floating Pin 1 polarity marker no longer overlaps the body edge when Pin 1 is close to the edge
Adjusted the DIP to compensate for additional configurations
Adjusted the DFN 2-Pin Diode model to have a polarity marker
Pulsonix
A new format for Pulsonix is online. The ability to export to PADS ASCII will still be available in the tool for a short time and is accessed by selecting Pulsonix (PADS).
PCAD, Pulsonix & DesignSpark
Issue causing Rounded Rectangles to import improperly
EAGLE
Issue that was preventing the top polygon of a D-Shape pad from generating properly
Solder Mask and Paste Mask have been fixed to directly mirror the exact shape of a D-Shape pad
When selecting rows in a FPX file to Build Library, the program froze
The Micro Chip component courtyard was accidentally changed from 0.15 mm to 0.25 mm
Right clicking on the FPXC Viewer no longer crashes it
Stencil pattern no longer shrinks the trim
Extents for micro parts expanded in Viewer to include polarity dot
Preferences for micro DFN & CHIPS updated
If you don’t see this remove or update your preference files

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Nick B Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 02 Jan 2012 Status: Offline Points: 1909	Post Options Post Reply Quote Nick B Report Post Thanks(0) Quote Reply Topic: Library Expert 2014.06 Released!! Posted: 04 Aug 2014 at 9:24am
	Version 2014.06 was just released!! NEW: Calculator Ability to set tab stops for entering dimensions in either nom/tolerance or min/max New Component Families Side Concave Inductors DFN 2-Pin Fuse Updated Toe Solder Joint Goals for Chip component less than 1.6 mm in length per the upcoming IPC-7351C 0402 Toe is now set to 0.15 mm 0201 Toe is now set to 0.12 mm 01005 Toe is now set to 0.10 mm Updated Periphery Solder Joint Goals for DFN component less than 1.6 mm in length per upcoming IPC-7351C Periphery Goal for these micro-miniature bottom only terminal packages is now set to -0.04 mm FP Designer Offset slotted holes Side Chamfered Rectangle Pads that are new in the Pad Stack Designer now export to CAD tools properly Issue related to the offsetting of pads. It should now translate properly the new offset functionality in the Pad Stack Designer. New FPXC to CAD Translator Added 3D STEP model output from FPXC files from the translator as an extruded block PADS to CAD was changed to FPXC to CAD. Now converts our new neutral library format to any CAD tool. FPXC to CAD now has a new Viewer to visually see the footprint features prior to importing it into their library FPXC to CAD was relocated from the Main Toolbar to the “Utility Tools” drop down 3D STEP Added models for new family Inductor, Side Concave 2 and 4 pin. Also added a model for new Family DFN 2-pin Fuse. Parts on Demand (POD) Added 17,000+ new parts Allegro/OrCAD PCB The ability to turn off the truncation of land pattern names is now available. Only use this if your version of Allegro or OrCAD PCB supports land pattern names longer than 30 characters. The grid change line in the pad stack creation is no longer applicable and useless(it previously caused an irrelevant error in the .jrl file that was ignored and did nothing). As such, it has been deprecated. PCAD, Pulsonix, and DesignSpark These 3 formats now only accept numeric layers and should be more understandable, as the LIA format they’re based on was never designed to actually accept custom strings as layer names. The LayerNumRef literal that was used in the Layer String is now automatically inserted any time a layer number is called out in the output. PADS VX is now supported as a PADS output PADS ASCII: When using a Part Type Name that is different from the Part Decal Name, the program will now properly use the Part Type Name rather than the Part Decal Name when calling out the Part in the .ASC Altium PADS ASCII files for Altium will be generated without use of PADS arcs. Instead, it will describe the arc as a series of points in the polygon. This should cause the D-Shapes and other such pads that use associated copper to render properly. FIXED / ENHANCED: Calculator Updated ability to Solder Mask Define Thermal Pads FP Designer Issue with Courtyard Excess to Pad clearance now works correctly 3D STEP Issue with the DIP leads that was causing them to not hit their exact location properly Replaced the DIP body that had some slight plane issues, with a clean model QFP floating Pin 1 polarity marker no longer overlaps the body edge when Pin 1 is close to the edge Adjusted the DIP to compensate for additional configurations Adjusted the DFN 2-Pin Diode model to have a polarity marker Pulsonix A new format for Pulsonix is online. The ability to export to PADS ASCII will still be available in the tool for a short time and is accessed by selecting Pulsonix (PADS). PCAD, Pulsonix & DesignSpark Issue causing Rounded Rectangles to import improperly EAGLE Issue that was preventing the top polygon of a D-Shape pad from generating properly Solder Mask and Paste Mask have been fixed to directly mirror the exact shape of a D-Shape pad When selecting rows in a FPX file to Build Library, the program froze The Micro Chip component courtyard was accidentally changed from 0.15 mm to 0.25 mm Right clicking on the FPXC Viewer no longer crashes it Stencil pattern no longer shrinks the trim Extents for micro parts expanded in Viewer to include polarity dot Preferences for micro DFN & CHIPS updated If you don’t see this remove or update your preference files
	Stay connected - follow us! X - LinkedIn