Convert Calculator Parts to FP Designer

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Many of my current footprints I create seem to be about 80 to 95% complete using one of the standard Through Hole or Surface Mount types, but have additions/slight changes from the standard. 
My current case in point is a Freescale accelerometer (MMA6853BKWR2). This devise follows the Surface Mount type "QFN with Tab", but also for better devise to PCB adhesion also contains 4 extra corner pads. This then leaves me with 2 options using Library Expert.

Use the standard Surface Mount type "QFN with Tab". Then export the footprint to my EDA tool (in this case Altium Designer) add the 4 pins manually. Then manually update the print from Lib Expert to include the 4 extra corner pads.
Create the entire thing using FP Designer. Which takes way to much of my time to complete and I am still left with a print which is nowhere complete enough to pass as a QFN with Tab. So I still have to do some heavy manipulation to the print to make up for the FP Designer prints short comings.
So my idea would be to allow us to use the Through Hole/Surface Mount types to do the "heavy lifting". Then be able to convert/move/push/pull (which ever way works best) the "type into FP Designer to finish up the 5 to 20%. Then be able to print this out and still keep the original type formatting rather than the very basic FP Designer print output.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
caclark Members Profile Send Private Message Find Members Posts Add to Buddy List Advanced User Joined: 24 Oct 2012 Location: Cincinnati, OH Status: Offline Points: 177	Post Options Post Reply Quote caclark Report Post Thanks(0) Quote Reply Topic: Convert Calculator Parts to FP Designer Posted: 30 Oct 2015 at 7:01am
	Many of my current footprints I create seem to be about 80 to 95% complete using one of the standard Through Hole or Surface Mount types, but have additions/slight changes from the standard. My current case in point is a Freescale accelerometer (MMA6853BKWR2). This devise follows the Surface Mount type "QFN with Tab", but also for better devise to PCB adhesion also contains 4 extra corner pads. This then leaves me with 2 options using Library Expert. Use the standard Surface Mount type "QFN with Tab". Then export the footprint to my EDA tool (in this case Altium Designer) add the 4 pins manually. Then manually update the print from Lib Expert to include the 4 extra corner pads. Create the entire thing using FP Designer. Which takes way to much of my time to complete and I am still left with a print which is nowhere complete enough to pass as a QFN with Tab. So I still have to do some heavy manipulation to the print to make up for the FP Designer prints short comings. So my idea would be to allow us to use the Through Hole/Surface Mount types to do the "heavy lifting". Then be able to convert/move/push/pull (which ever way works best) the "type into FP Designer to finish up the 5 to 20%. Then be able to print this out and still keep the original type formatting rather than the very basic FP Designer print output.



Nick B Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 02 Jan 2012 Status: Offline Points: 1909	Post Options Post Reply Quote Nick B Report Post Thanks(0) Quote Reply Posted: 30 Oct 2015 at 12:05pm
	This part is now on POD, available for free to Library Expert Pro customers with the latest release. Chris, for future reference, please submit the part request via pod at www.PCBLibraries.com/POD Here is your part: www.pcblibraries.com/pod/?WP=1&M=FREESCALE&PN=MMA6853BKWR2
	Stay connected - follow us! X - LinkedIn

Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5719	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 23 Jul 2016 at 8:42am
	You can now Convert Calculator parts to FP Designer in V2016.09 pre-release. Exception, these Calculator families cannot be converted to FP Designer do to the unique Legend outline or component dimensional complexity - TO92, Capacitor, Aluminum Electrolytic (CAPAE), DPAK, Flange Mount (TO-220), Mounting Holes
	Stay connected - follow us! X - LinkedIn

caclark Members Profile Send Private Message Find Members Posts Add to Buddy List Advanced User Joined: 24 Oct 2012 Location: Cincinnati, OH Status: Offline Points: 177	Post Options Post Reply Quote caclark Report Post Thanks(0) Quote Reply Posted: 25 Jul 2016 at 5:32am
	Sorry, I have been out on vacation for the last week, so I was not able to reply until now. It works as expected. It is a little cumbersome on how you have to add a new (unrelated pin) to the footprint after the move over to the FP Designer. By this I mean that you have to go into the pin property modify an existing one then add your new one to the list, then return to the Pins tab to add the newly created one as a unrelated pin. Just a thought; What if in the Pins tab there was an option in the dropdown menu to "Add New" or some wording like that at the bottom of the list, that would send you automatically to the Pad Stack Manager GUI. This would then eliminate all of the back and forth in the above mentioned paragraph. That is essentially what I am doing is getting to the Pad Stack Manager to add another pin to the list anyway.

Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5719	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 25 Jul 2016 at 6:26am
	You select the Pad Stack icon in the toolbar - This opens the Pad Stack Manager. Then select the New button to create a new Pad Stack in the Pad Stack Designer.
	Stay connected - follow us! X - LinkedIn