Add Polarity Pads Graphic in all the Family

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

Add the possibility to have pads Rectangular on Pins 1 in the all family. 
If your cad support the rounded pad or a user chose to Oblong pads. 
So it will be easy see the polarity of the components even is Silkscreen is Not printed on the PCB.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Artwork Master ITALY Members Profile Send Private Message Find Members Posts Add to Buddy List Active User Joined: 12 Mar 2012 Location: Milano ITALY Status: Offline Points: 43	Post Options Post Reply Quote Artwork Master ITALY Report Post Thanks(0) Quote Reply Topic: Add Polarity Pads Graphic in all the Family Posted: 29 May 2012 at 7:17am
	Add the possibility to have pads Rectangular on Pins 1 in the all family. If your cad support the rounded pad or a user chose to Oblong pads. So it will be easy see the polarity of the components even is Silkscreen is Not printed on the PCB.



Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5718	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 22 Oct 2012 at 9:18am
	You can easily change the pad shape for all pins and have a different shape for Pin 1 to show polarity when there is no silkscreen outline. Open "User Preferences > Components > Surface Mount > SOIC > Pin 1 Pad Shape"