PCB Model Selection Confirm - Molded Body
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3600
Printed Date: 15 Feb 2026 at 2:23am
Topic: PCB Model Selection Confirm - Molded Body
Posted By: m.elsayed
Subject: PCB Model Selection Confirm - Molded Body
Date Posted: 12 Feb 2026 at 10:56am
|
For this part” TAJB685M025RNJ” in this datasheet “ http://download.siliconexpert.com/pdfs2/2026/1/22/22/20/26/9847155927/avx_/manual/taj.pdf" rel="nofollow - http://download.siliconexpert.com/pdfs2/2026/1/22/22/20/26/9847155927/avx_/manual/taj.pdf ” What PCB Model should we use to create
Footprint ? Is it “Molded Body”? Correct or
wrong |
Replies:
Posted By: Tom H
Date Posted: 12 Feb 2026 at 4:31pm
It is a 'Molded Body' package if the 'D1' dimension is at least 0.60 mm less than the 'D' dimension.  If the 'D1' dimension is less than 0.60 from the 'D' dimension, then it's an FP Designer footprint. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: m.elsayed
Date Posted: 14 Feb 2026 at 9:57pm
|
1-Please add more detail is that generic rules for simlair case if the 'D1' dimension is less than 0.60 from the 'D' dimension, then it's an FP Designer footprint. 2- also in FP tab, create it normal and after that choose to transfer to fp tab, or i must create it from scratch in FP tab
|