BGA D E problem
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3389
Printed Date: 24 Nov 2024 at 4:55am
Topic: BGA D E problem
Posted By: wheelee
Subject: BGA D E problem
Date Posted: 06 Jun 2024 at 7:21pm
 D & E size always get interchange
|
Replies:
Posted By: Tom H
Date Posted: 07 Jun 2024 at 9:08am
|
The Footprint Expert default footprint orientation is pin A1 in the Lower Left per IEC 61188-7 International Standard. If you move pin A1 to the Upper Left, you swap the "D" and "E" dimensions for BGA's. Our recommendation to to follow the program default orientation when creating the footprint and then rotate it after the footprint is created. The final rotation will be saved to the FPX file. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: wheelee
Date Posted: 10 Jun 2024 at 6:09pm
I did not move anything, A1 defaults to the upper Left - do you even look & check at your own software? |
Posted By: Tom H
Date Posted: 10 Jun 2024 at 8:51pm
|
Open Tools > Options and select File > Internal Defaults Then select File > Save As > whatever Name You Want. Then open the BGA calculator and see where pin A1 is. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |