Print Page | Close Window

CLASS 3 Design Specs

Printed From: PCB Libraries Forum
Category: Training / Events
Forum Name: PCB Design Basics
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=331
Printed Date: 25 Nov 2024 at 1:54am


Topic: CLASS 3 Design Specs
Posted By: BryanT
Subject: CLASS 3 Design Specs
Date Posted: 11 Jun 2012 at 10:55am
Hi All,
 
Does anyone have a chart or some type of consolidated list of the requirements for a CLASS 3 PCB Design?
 
It would really help to have all the requirements in an easy to read chart or list.
 
Thanks in advance!
Bryan


Replies:
Posted By: Tom H
Date Posted: 14 Jun 2012 at 6:42pm
That's a big question. But it needs to be answered. I'm working on Class 3 Type 4 designs for a space project, but the notes all lead back to some IPC standard.
 

Posted By: Lingamoorthi
Date Posted: 26 Sep 2012 at 9:19pm
Friends,

Can you please let me know if we have any IPC standards for Routing?

Linga

Posted By: Tom H
Date Posted: 27 Sep 2012 at 2:45pm
I've never heard of any IPC standard for routing.
 
Also, trace routing is not included in either the CID or CID+ study guides.
 

Posted By: Lingamoorthi
Date Posted: 27 Sep 2012 at 7:45pm
Hi Tom,

Thanks a lot for your information.

Linga

Posted By: marce
Date Posted: 02 Oct 2012 at 7:02am
Class 3 is mainly down to land/hole ratios and quality of the manufacturerd PCB, for full class 3 a test coupon(s) is tested from each panel forplating thickness etc.

-------------
Marce


Print Page | Close Window