Print Page | Close Window

Part builder ITAR approved?

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3223
Printed Date: 25 Nov 2024 at 3:22am


Topic: Part builder ITAR approved?
Posted By: pcbdznr-Wilson
Subject: Part builder ITAR approved?
Date Posted: 03 Feb 2023 at 11:47am
Are parts made by PCBLibraries ITAR cleared?


Replies:
Posted By: Tom H
Date Posted: 03 Feb 2023 at 1:42pm
They certainly can be by special request. 

We will create them in San Diego, CA. 
  • $5 per standard footprint with public datasheet via URL web-link
  • $10 per non-standard footprint with public datasheet via URL web-link
  • $20 per any footprint with confidential datasheet via .PDF file
  • $35 per any footprint that takes over 3 hours to build
All footprint requests must be emailed directly to us and not submitted on our website part request form.

All non-standard datasheets must provide the mfr. recommended pattern and pin assignments. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: pcbdznr-Wilson
Date Posted: 05 Feb 2023 at 5:37pm
Thanks Tom.

Randy Torgerson says to say hi.

Hi!


Print Page | Close Window