Print Page | Close Window

Pin in Paste

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3208
Printed Date: 25 Nov 2024 at 2:34am


Topic: Pin in Paste
Posted By: phil.holden
Subject: Pin in Paste
Date Posted: 12 Jan 2023 at 8:09am
Are there any plans for inclusion of a 'Pin in Paste' hole size calculator? Or does anybody have any credible information regarding making this calculation. 


Replies:
Posted By: Tom H
Date Posted: 12 Jan 2023 at 9:44am
Pin-in-Paste has been a feature in Footprint Expert from the first release. 

Tools > Options > Console > Generate Through-hole Paste Mask 

This will add paste mask to all through-hole footprints. 

You can turn it on to create an entire library with Pin-in-Paste technology using your existing FPX file library. 

You can add a Density Level (Suffix) modifier to identify the footprints that have Paste Mask. I recommend "P" or "PIP". Use the "Overwrite Footprint Name Suffix" option right above the "Generate Through-hole Paste Mask" button. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: phil.holden
Date Posted: 13 Jan 2023 at 2:55am
Hi Tom,

I know we have had the ability to include the paste mask in through-hole footprints. I was wondering whether there was an actual calculator for getting the hole-to-lead ratio correct for the purpose of PIP technology? 

Posted By: Tom H
Date Posted: 13 Jan 2023 at 9:38am
There is not a Pin-in-Paste calculator as there is no guidance from any world standards group like IPC. 

When I see a Pin-in-Paste in the mfr. recommended pattern, they normally call out the paste mask size. 

If you have a known calculator for Pin-in-Paste technology, please send it to us. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: Tom H
Date Posted: 13 Jan 2023 at 10:35am
There is a feature in Footprint Expert called "Incremental Pad Stack" in which the pad size annular ring gets bigger an bigger depending on the terminal lead size. 

The calculation is - Pad Size is 1.5X of the hole size. 

1 mm hole = 1.5 mm pad (0.25 annular ring)
2 mm hole = 3.0 mm pad (0.50 annular ring)
3 mm hole = 4.5 mm pad (0.75 annular ring)
4 mm hole = 6.0 mm pad (1.00 annular ring) 

The hole size is calculated from the max. lead diameter. 

So the 1.1 scale paste mask over pad size should be adequate, but I see Samtec connectors call out large paste mask sizes in their datasheets. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window