FP Designer: Pad Stack Designer
Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3045
Printed Date: 25 Nov 2024 at 12:45am
Topic: FP Designer: Pad Stack Designer
Posted By: Bharat_Verma
Subject: FP Designer: Pad Stack Designer
Date Posted: 11 Feb 2022 at 3:15am
|
While preparing one footprint for MPN :821-22-007-10-00010, we found that pad stack designer round-up hole diameter on upper limit. As here 0.71 mm hole must be round up as 0.70 mm (nearest tool size), but here its round up as 0.75 mm.  |
Replies:
Posted By: Jeff.M
Date Posted: 11 Feb 2022 at 8:35am
|
There is an option for through-hole pad stacks (both in Tools > Options > Terminals > Through-Hole and on the Options tab, next to the Pads tab shown in your image) that allows you to set the roundoff value for both the pads and the hole. Adjust these values to fit your needs:  ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: Bharat_Verma
Date Posted: 12 Feb 2022 at 4:25am
|
Hello , But that options are disable, i mean we can not change it .
|
Posted By: Tom H
Date Posted: 12 Feb 2022 at 8:49am
|
You Must save the Default Options (File > Save As) your file name, before you can edit them. You cannot edit the master default Options. Save to your name first. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |