3D Model Pin 1 Polarity Dot
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2782
Printed Date: 06 Oct 2024 at 7:12pm
Topic: 3D Model Pin 1 Polarity Dot
Posted By: mnperry
Subject: 3D Model Pin 1 Polarity Dot
Date Posted: 13 Jan 2021 at 2:22pm
|
When I export my part to Altium there is no white dot on the 3D model as show here.  Thoughts? Thank you.
|
Replies:
Posted By: Tom H
Date Posted: 13 Jan 2021 at 2:42pm
|
Is this for the SOP component family? We need the URL link to the datasheet so we can reproduce the error. ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |
Posted By: mnperry
Date Posted: 13 Jan 2021 at 3:58pm
|
It is an SOIC-8. The Analog Devices R-8 package. Here is a link to a part that uses that package. http://https://www.analog.com/media/en/technical-documentation/data-sheets/AD8675.pdf" rel="nofollow - https://www.analog.com/media/en/technical-documentation/data-sheets/AD8675.pdf
|
Posted By: Tom H
Date Posted: 13 Jan 2021 at 4:11pm
|
This package is not a metric pitch SOP. It is a 50 mil pitch SOIC. The Polarity Marker is a Chamfered Body along the entire upper edge of Pin 1.  ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |