3D Model Plated Through Lead length
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2655
Printed Date: 06 Oct 2024 at 11:25pm
Topic: 3D Model Plated Through Lead length
Posted By: acastro
Subject: 3D Model Plated Through Lead length
Date Posted: 22 Jul 2020 at 8:45am
|
Hello, Is it possible to control the length of leads? Depending on the board thickness, there are occasions were the lead on the step model does not protrude the board. If this is not currently possible, would it be possible to include this in an upcoming revision?
|
Replies:
Posted By: Tom H
Date Posted: 22 Jul 2020 at 8:57am
|
Controlling the through-hole lead length has always been possible. All through-hole leads stop at the top of the PCB. The User enters a value on how far the lead goes through the board and out the back. You need to have 3D models that can handle any PCB thickness.  ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |