Print Page | Close Window

Flex Designs

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2623
Printed Date: 07 Oct 2024 at 1:20am


Topic: Flex Designs
Posted By: Terry
Subject: Flex Designs
Date Posted: 18 Apr 2020 at 3:25pm
Do footprint pads require adjusting when used in a Flex Design?


Replies:
Posted By: Tom H
Date Posted: 18 Apr 2020 at 5:44pm






Good question. 

Yes they do if you want to do it right. 

I recommend that you create a new Preference file called FLEX.dat by simply saving your existing Preference file to a new name. 

Then Solder Mask Define the Toe & Heel (not the Side) by 0.05 mm. This will help the copper pad adhere to the flex board. 

Then in the Console Preferences, overwrite the Suffix from IPC Density L, N, M to FLX or F or whatever you want and create a flex library that is specifically used for flex design. 

You can have multiple Preference files, but be sure to load the correct one for the technology you're using. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window