Print Page | Close Window

"E" dimension in TO-92

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2604
Printed Date: 25 Nov 2024 at 2:35am


Topic: "E" dimension in TO-92
Posted By: Batiskaff
Subject: "E" dimension in TO-92
Date Posted: 19 Feb 2020 at 10:22am
In TO-92 family, is "E" dimension spacing from body edge to body corner
or from body edge to terminal edge?
Or may be from edge of body to terminal center, for example
https://www.nxp.com/docs/en/package-information/SOD70.pdf" rel="nofollow - https://www.nxp.com/docs/en/package-information/SOD70.pdf
E(in calculator)=d(in drawing)


Replies:
Posted By: Jeff.M
Date Posted: 19 Feb 2020 at 12:06pm
Notice that in the TO92, one edge of all terminals fall on a line that bisects the case diameter were it to be totally round. The 'E' dimension is from the flat side to that line.

-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window