Print Page | Close Window

HARWIN M20-7812045 Size of Pin 1 Marking

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2521
Printed Date: 26 Nov 2024 at 6:40am


Topic: HARWIN M20-7812045 Size of Pin 1 Marking
Posted By: toshas
Subject: HARWIN M20-7812045 Size of Pin 1 Marking
Date Posted: 31 Aug 2019 at 9:14am

Hi!

I tried to change size of pin1 mark in HARWIN M20-7812045 footprint with no success.
Drafting - Legend - Pin 1 Size - OK. Nothing was changed.
What is the right way to do it ?

Thanks!


Replies:
Posted By: Tom H
Date Posted: 31 Aug 2019 at 9:59am
For all FP Designer connectors, do this... 
Right Mouse Button (RMB) and select "Shapes". 
Double Click on the Polarity Marker. 
A dialog box should appear, but if the Polarity Marker is selected just RMB and select "Properties"
Then select any new shape, change any layer, change the size and location. 
Note: if the Polarity Marker is filled, unselect the Filled button after you change the size and then reselect the Filled button to refill the shape. 
Then Apply and exit. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: toshas
Date Posted: 31 Aug 2019 at 10:33am
Got it! Thanks!


Print Page | Close Window