Print Page | Close Window

Pad to Slot Ratio

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2394
Printed Date: 26 Nov 2024 at 5:49pm


Topic: Pad to Slot Ratio
Posted By: Batiskaff
Subject: Pad to Slot Ratio
Date Posted: 31 Oct 2018 at 4:09am
What mean "Pad to Slot Ratio" from Through Hole - Terminal - Settings. Where it used?


Replies:
Posted By: Tom H
Date Posted: 31 Oct 2018 at 7:26am
The Pad to Hole ratio is set to 1.5. This means the pad size is 1.5 times bigger than the hole size. 

Example: if the Hole Size is 1.00 the Pad Size is 1.50 or 0.25 annular ring. If the hole size is 2.00 the pad size will be 3.00 or 0.50 annular ring. 

The same theory is used for Slotted Holes but with a 1.75 multiplier. This is because the slotted hole drilling process of drill and drag. The annular ring needs to be more robust. 

However, all these values can be edited by the user to be whatever you think is best. The default values are our best option but all Preference values are user definable for you to customize your personal PCB library. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: Batiskaff
Date Posted: 01 Nov 2018 at 2:09am
Slotted Holes are in Mounting Hole only, or are another families with ones?

Posted By: Tom H
Date Posted: 01 Nov 2018 at 7:39am
Slotted holes are mostly used in the Foot Print (FP) Designer program in Library Expert. 

Mostly in connectors and the slots can be offset from the pad too. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window