http://www.pcblibraries.com/downloads" rel="nofollow - 
NEW / ENHANCED:
- Calculator:
- All parts with Thermal Pads – if a Thermal Pad is less than 1.00 mm width, it will now get 100% Paste Mask Coverage
FIXED: - Calculator:
- Non-Plated Mounting Holes – fixed an issue with the Keep-out size generation to follow the Hole Size instead of the pad size
- Unique Parts:
- Fixed and issue with footprints with associated copper on slotted holes. This affected all CAD tool translators.
- POD Builder:
- Fixed an issue that was creating Handled Exception Errors for certain parts
- Library Editor:
- The automatic Manufacturer Name feature was fixed to only activate in the Manufacturer column
- Drafting Items:
- Fixed an issue when placing Drafting Outlines on the Bottom Assembly layer, reopening the properties menu displayed the incorrect layer assignment
- PADS Layout:
- BGA component family – fixed an issue where unpopulated pins showed up in the Part Type
- Xpedition:
- Fixed a problem with non-plated slotted holes that used circular pads smaller than the hole size
- Allegro/OrCAD PCB:
- Fixed an issue with offsetting top pads
- Chamfered Rectangular pads with a corner length greater than half the edge are now converted to custom pads. A rectangle pad stack in Cadence cannot have a corner length that exceeds more than half the width.
- Custom Pads which are offset from the center of the Pad Stack are now removed from the pad stack and converted to free floating copper. This is the *only* known way of offsetting a shape symbol pad as Allegro appears to be bugged and will not save offsets for Shape Symbol Pads.
- Fixed a problem with negative rotation arcs that end at 0
- Fixed a problem that was causing an error when the build was run more than once
- Attached copper shapes with an offset will now rotate properly with their underlying pad stack
- The translator will now differentiate when you have two pad stacks that are exactly the same, but differ in offset of attached copper
- KiCad:
- Fixed an issue where the terminal outlines were getting duplicated. They should now be generated only once.
- The two Ref Des texts will now swap their layer. The primary reference text being on the Fabrication layer, and the extra user reference being on the Silkscreen layer.
- Filled Paste Mask shapes for thermal tab checker-board patterns will no longer translate as unfilled lines. Instead, they will come in as Pads named “” on the F.Paste layer.
-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn
|