Print Page | Close Window

3D STEP Polarity Markers

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Product Suggestions
Forum Description: request new features
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2050
Printed Date: 25 Nov 2024 at 1:31am


Topic: 3D STEP Polarity Markers
Posted By: Guenter P
Subject: 3D STEP Polarity Markers
Date Posted: 05 Jan 2017 at 1:28pm
I use Target 3001 for the layout development. And I imported into my layout library the Library Expert 3D Step models.
 
Depending on view direction and zoom factor in Target 3001 the polarity markers are shown sometimes very patchy.
 
The sample part in the picture is a SMD Aluminium Electrolytic capacitor:
uploads/10602/SMD_Aluminium_Electrolytic.fpx" rel="nofollow - uploads/10602/SMD_Aluminium_Electrolytic.fpx
 
Obviously does Target 3001 not calculate the view accurate enough. Maybe others have also this problem.
This display problem could be solved when the 3D Step export of library expert would use slightly thicker pin 1 markers.


Print Page | Close Window