CM Chip Inductor (4-Lead)
Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1454
Printed Date: 25 Nov 2024 at 1:52am
Topic: CM Chip Inductor (4-Lead)
Posted By: Snakeeater
Subject: CM Chip Inductor (4-Lead)
Date Posted: 22 Oct 2014 at 8:51am
|
Hello, Looking for input on constructing the following component: It is a Common Mode Chip Inductor (4-Pins, 0805) DLW21SN900HQ2L  I was thinking it would fall into the Chip Array family, or possibly the DFN 4-Lead. Would someone kindly steer me in the right direction? Thank you in advance, Iain |
Replies:
Posted By: Tom H
Date Posted: 22 Oct 2014 at 10:34am
|
Murata does not have a recommended pattern in their datasheet - http://search.murata.co.jp/Ceramy/image/img/PDF/ENG/L0114S0133DLW21S.pdf" rel="nofollow - http://search.murata.co.jp/Ceramy/image/img/PDF/ENG/L0114S0133DLW21S.pdf I would recommend a 0.1 mm periphery around the component lead. This part would take 3 minutes to create in the Library Expert "FP Designer". ------------- Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn |