Print Page | Close Window

Explanation of Naming Convention

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Allegro
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1426
Printed Date: 25 Nov 2024 at 1:56am


Topic: Explanation of Naming Convention
Posted By: chads108
Subject: Explanation of Naming Convention
Date Posted: 17 Sep 2014 at 1:49pm

I just created a footprint for a SOT23 and the resulting footprint name suggested is SOT95P230X120-3L18N. 

I understand everything in that name except the L18 part. 

I am assuming it is some reference to a dimension, but I sure can't figure it out in looking at the datasheet. 

What is that referring to?


Replies:
Posted By: Tom H
Date Posted: 17 Sep 2014 at 1:57pm

You have the "Extended Footprint Names" turned on in User Preferences.

The L18 = the Lead Tolerance for a Gull Wing lead form.

The lead tolerance impacts the pad length. A lead tolerance of 0.18 mm is good, but some Gull Wing leads have a tolerance of 0.60 mm to 0.90 mm and that makes a big difference in the pad length.

Without the extended names for gull wing, the IPC-7351 calculator would auto-generate a duplicate footprint name even though the pad lengths could vary in length.

I'll bring this to the attention of the IPC-7351 land pattern committee on Wednesday October 1st in Chicago, IL.



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window