explain the bottom section 3d TH
Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=1333
Printed Date: 25 Nov 2024 at 9:48am
Topic: explain the bottom section 3d TH
Posted By: mytime
Subject: explain the bottom section 3d TH
Date Posted: 09 May 2014 at 2:20pm
|
TH Lead What is that? the length of the lead |
Replies:
Posted By: chrisa_pcb
Date Posted: 09 May 2014 at 2:56pm
| TH Lead Length is the length that a through hole lead extends beneath the origin, with a minimum of .1mm so that the model maintains its structure. So if you select 1mm, the leads will extend to -1mm in the vertical axis. Its done this way so that you can specify a board width(which might change), and be able to see the pins of the part poke out the opposite side. |