Corner radius 0201 cap

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi all,
I created my first 0201 capacitor and I feel that using a Corner Radius Size Limit parameter= 0.1mm could be "risky" (I used Fab Tol= 0, Placement Tol=0).

I know that some manufacturers use 0.05mm.
My component is GRM033R61C104KE14D from Murata

Which is your recommendation for this tiny component sizes?

Waiting for your comments.
david

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
dramos Members Profile Send Private Message Find Members Posts Add to Buddy List Advanced User Joined: 18 Feb 2021 Status: Offline Points: 90	Post Options Post Reply Quote dramos Report Post Thanks(0) Quote Reply Topic: Corner radius 0201 cap Posted: 3 hours 41 minutes ago at 4:09am
	Hi all, I created my first 0201 capacitor and I feel that using a Corner Radius Size Limit parameter= 0.1mm could be "risky" (I used Fab Tol= 0, Placement Tol=0). I know that some manufacturers use 0.05mm. My component is GRM033R61C104KE14D from Murata Which is your recommendation for this tiny component sizes? Waiting for your comments. david