Terminology

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Currently we make our pcb foot prints IAW IPC7351B. Recently I was asked if that met the requirements of J-STD-001F. After reading through both I saw on page 1 of IPC7351B : 

"1.1 Purpose 
The intent of the information presented herein is to provide the appropriate size, shape and tolerance of surface mount land patterns to insure sufficient area for the appropriate solder ﬁllet to meet the requirements of IPC J-STD-001, and also to allow for inspection, testing, and rework of those solder joints." 

That said, the answer is yes. 

My question : Does PCB Libraries Expert and LP Wizard satisfy the requirements found in J-STD-001F table 7-7 class 3? How does it take into any variation in solder thickness (G)?

Thanks

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
VinS Members Profile Send Private Message Find Members Posts Add to Buddy List New User Joined: 04 Nov 2016 Status: Offline Points: 2	Post Options Post Reply Quote VinS Report Post Thanks(0) Quote Reply Topic: Terminology Posted: 04 Nov 2016 at 5:18am
	Currently we make our pcb foot prints IAW IPC7351B. Recently I was asked if that met the requirements of J-STD-001F. After reading through both I saw on page 1 of IPC7351B : "1.1 Purpose The intent of the information presented herein is to provide the appropriate size, shape and tolerance of surface mount land patterns to insure sufficient area for the appropriate solder ﬁllet to meet the requirements of IPC J-STD-001, and also to allow for inspection, testing, and rework of those solder joints." That said, the answer is yes. My question : Does PCB Libraries Expert and LP Wizard satisfy the requirements found in J-STD-001F table 7-7 class 3? How does it take into any variation in solder thickness (G)? Thanks



Tom H Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: 05 Jan 2012 Location: San Diego, CA Status: Offline Points: 5719	Post Options Post Reply Quote Tom H Report Post Thanks(0) Quote Reply Posted: 04 Nov 2016 at 7:27am
	Library Expert V2016 comes with IPC-7351B default solder joint goals. Library Expert V2017 comes with IPC-7351C default solder joint goals. However, Library Expert allows the user to change any of the 60 different terminal settings to any Toe, Heel and Side solder joint goal that the user manufacturing facility wants and needs for their assembly process. I would say that IPC-7351B is too robust in some cases and too small in other cases. These issues have all been resolved in the IPC-7351C. Download Surface Mount and Through-hole Component Families and every other document here - www.pcblibraries.com/downloads
	Stay connected - follow us! X - LinkedIn