Numeric Pin Names on Diode
Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=945
Printed Date: 19 Nov 2024 at 4:26am
Topic: Numeric Pin Names on Diode
Posted By: Lekselius
Subject: Numeric Pin Names on Diode
Date Posted: 22 May 2013 at 1:37am
|
I'm trying to rename the Pins on a diode from C/A to 1/2 in a molded body using "Right click" -> "Properties" but when changing to a numeric value I get the message "Use 'Pin Reorder' to generate numeric pin names". However 'Pin Reorder' is not available when I right click on the pin. (It comes up fine with e.g. SOT23). A workaround is to set the family to "polarized capacitor" but I would like to have the pin names to 1 and 2 for the diodes as well.
|
Replies:
Posted By: Tom H
Date Posted: 22 May 2013 at 12:42pm
|
You need to "Right Mouse Click" on the pads. If the Pad has an Alphabetical name this will appear -  If the pad has Numeric pin assignment, this will appear -  |