Print Page | Close Window

IPC CLASS 3 Footprints / Land Patterns

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Altium
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=944
Printed Date: 12 Oct 2024 at 7:23pm


Topic: IPC CLASS 3 Footprints / Land Patterns
Posted By: Shean.huey
Subject: IPC CLASS 3 Footprints / Land Patterns
Date Posted: 21 May 2013 at 9:59pm
Hi,

I'm very new to IPC Class 3 design.
Are there any informations on IPC Class 3 component footprint creations?
What are the standards requirements to follow?
Has anyone ever done IPC Class 3 layout design?


Replies:
Posted By: Tom H
Date Posted: 22 May 2013 at 6:49am
Class 3 for PCB design is clearly defined in the IPC-2221 and IPC-2222 standards. I think you get them both when you purchase.
 
Plus the IPC-7351B also goes into the Classes for PCB library creation.
 
I recommend these standards for all PCB designers.
 

Posted By: konraditen
Date Posted: 23 May 2013 at 8:10am
Just an addition to Tom's answer, if you need to buy a bunch of standards from IPC you might as well get the Printed Board Design Standards Collection C-106. Overall cheaper.

Alles Gute,
 Konrad


Print Page | Close Window