http://www.pcblibraries.com/downloads" rel="nofollow -  Fixes & Enhancements: - CAD Tool Interfaces:
- Changed Translator options are not being read back.
- All CAD tools – unable to open previously saved option files.
- eCADSTAR – removed "Pin Naming" feature.
- Footprint Viewer Toolbar:
- Renamed the Tool Tip for the layer dropdown menu to "Bring To Front".
- Calculators:
- Flange Mount Vertical – selecting pins threw an Unhandled Exception error.
- QFN with No Thermal – when Pin 1 is longer, the "Set New Pin 1" feature is now disabled.
- Corner Concave Oscillator – Pin 1 dot when pads too close for normal silkscreen outline.
- Molded Body – The Terminal Density Level thumbnail image was missing.
- Molded Body – updated the error message when the D1 dimension is not 0.60 smaller than the D dimension.
- Options:
- Terminals > SM Grid Array > BGA, Non-Collapsing Ball > Add Ball Sizes 0.75, 0.65, 0.40, 0.17
- Terminals > SM Grid Array > BGA, Non-Collapsing Ball > 0.55 Nominal Ball > Adj. % was 10% (now 15%).
- Drafting > Silkscreen > Add Value to Footprint – not working.
- Terminals > Through-hole – when setting up a solder mask oversize, selecting the Least Density turned the oversize off.
- Console Options – updated the Decimal Place Accuracy for mils to be 1 mil increments and metric 0.01 increments.
- Terminals > Gullwing, SO and QFP – Least Density > Pitch >=1.00 mm updated Heel value from 0.20 to 0.40
- When opening a new Option file, the Calculator did not readily apply the settings.
- Terminal Options for CGA and LGA default settings were updated.
-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn
|