http://www.pcblibraries.com/downloads" rel="nofollow -  Fixes & Enhancements: - Batch Build:
- Create new name in selected units not working
- Options:
- "Rectangular End Cap" terminal definition changed to "Rectangular or Square End" per IPC-7352
- "Side Lead" definition changed to "Leadless" per IPC-7352
- J-Lead terminal option for Most Density Level toe changed from 0.01 to 0.10
- IPC-7352.opt – Changed Inward Flat Ribbon L Lead Height > 4.20 mm Least Density Side from -0.05 to 0.00
- 3D STEP:
- Chip and Molded body 3D polarity stripe can appear toward #2 pin in small package parts
- FP Designer:
- Move Origin by X & Y using non-millimeter units isn’t working
- Assembly outline polarity not responding to Mirror or Rotate footprint commands
- Library Editor:
- Code added to disallow extended ascii in all text either edited or pasted
- Calculators:
- DFN 3 and 4 pin – The IPC footprint naming convention had the pin qty listed twice
- Corner Concave Package polarity dot is not following pad-silkscreen rule
- Molded Body:
- Added Thyristor component family and 3D STEP model
- Added D – D1 nominal not to exceed 0.60 mm error flag
- User Interface:
- Resize options now allowed on all dialog boxes
- Viewer mouse wheel functions re-defined – (no key) pan up/down, +shift - pan right left, +control - zoom in/out
- CAD Tool Interfaces:
- Altium:
- Added option to include footprint name in the ‘save-to’ directory path
- KiCad:
- Pad non 0-90-180-270 orientations now allowed
- Rectangular thermal tab pattern defined solder mask shapes not filled
- Thermal tab rectangular shapes corners are always rounded
-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn
|