Print Page | Close Window

Drill Symbol Definition - Allegro

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Allegro
Forum Description:
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=3259
Printed Date: 12 Oct 2024 at 5:21pm


Topic: Drill Symbol Definition - Allegro
Posted By: Arun7290
Subject: Drill Symbol Definition - Allegro
Date Posted: 15 Apr 2023 at 11:05am
I would like to know if there are any guidelines or any set of rules for defining the drill symbols in Allegro pad stack editor. 

I have noticed that whenever we generate any through hole footprint from the Footprint expert into Allegro, it generates footprint and pad stack files. 

And the pad stack files are having the drill figure, drill figure width & height and drill character defined. 

But I couldn't understand how it gets defined.


Replies:
Posted By: Jeff.M
Date Posted: 17 Apr 2023 at 7:53am
The drill symbol shape is fixed as a cross.
The size is fixed at 1 mm.


-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - Twitter - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn


Print Page | Close Window