Print Page | Close Window

Maximum or Nominal Body Dimensions For Legend

Printed From: PCB Libraries Forum
Category: Libraries
Forum Name: Footprints / Land Patterns
Forum Description: [General or a CAD specific issues / discussions]
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2506
Printed Date: 12 Oct 2024 at 7:31pm


Topic: Maximum or Nominal Body Dimensions For Legend
Posted By: Batiskaff
Subject: Maximum or Nominal Body Dimensions For Legend
Date Posted: 28 Jun 2019 at 11:57am
Which are package dimensions are preferred to use to draw the legend outline (nominal or maximal body dimensions)? 

Any general requirements for this?

For example package:  https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D67.PDF" rel="nofollow - https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D67.PDF



Replies:
Posted By: Tom H
Date Posted: 28 Jun 2019 at 12:01pm
The Maximum Body Dimensions, because then you can see the Legend after assembly. 

You can also QC the placement accuracy of the assembly process. 

If the component is covering the Legend on one side and highly exposed on the other side may indicate assembly flaws. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: Batiskaff
Date Posted: 28 Jun 2019 at 12:27pm
Thank you.


Print Page | Close Window