Print Page | Close Window

Add Test Point Obstruct in Xpedition Footprint

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2247
Printed Date: 19 Nov 2024 at 2:33am


Topic: Add Test Point Obstruct in Xpedition Footprint
Posted By: mahmoodv99
Subject: Add Test Point Obstruct in Xpedition Footprint
Date Posted: 07 Nov 2017 at 4:11am
How to include Test Point Obstruct in Xpedition footprints? (Same as No Probe Top in Allegro)


Replies:
Posted By: Tom H
Date Posted: 07 Nov 2017 at 7:58am
Not exactly the same as Allegro, but you can insert a Keep-out for Test Points, Vias, Traces, Copper Pour or Placement on Top, Bottom or All layers with Rectangle, Square, Round or map to the Courtyard outline.

Use the Drafting icon in the calculator toolbar and select "Keepout".





-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: mahmoodv99
Date Posted: 07 Nov 2017 at 9:24pm
Originally posted by Tom H Tom H wrote:

Not exactly the same as Allegro, but you can insert a Keep-out for Test Points, Vias, Traces, Copper Pour or Placement on Top, Bottom or All layers with Rectangle, Square, Round or map to the Courtyard outline.

Use the Drafting icon in the calculator toolbar and select "Keepout".
 
Thanks,

It will be good if it create automatically like courtyard with excess option.


Print Page | Close Window