Print Page | Close Window

Allegro 3D orientation

Printed From: PCB Libraries Forum
Category: PCB Footprint Expert
Forum Name: Questions & Answers
Forum Description: issues and technical support
URL: https://www.PCBLibraries.com/forum/forum_posts.asp?TID=2240
Printed Date: 19 Nov 2024 at 2:32am


Topic: Allegro 3D orientation
Posted By: lalexman
Subject: Allegro 3D orientation
Date Posted: 10 Oct 2017 at 7:38am
I am just starting to use the 3D step files with Allegro. 

I have a 16 pin right angle connector footprint. 

The 3D part I view in Allegro is rotated 90 degrees. 

Shouldn't the step files match the footprint?

 


Replies:
Posted By: Tom H
Date Posted: 10 Oct 2017 at 7:42am
In the CAD tool Translator menu, at the bottom is the 3D STEP options. 

Do you have the Vertical Axis set to "Z" or "Y". 

Allegro uses "Z". 

The 3D STEP model always aligns with the corresponding footprint. 



-------------
Stay connected - follow us! https://twitter.com/PCBLibraries" rel="nofollow - X - http://www.linkedin.com/company/pcb-libraries-inc-/" rel="nofollow - LinkedIn

Posted By: lalexman
Date Posted: 10 Oct 2017 at 7:48am
That fixed it. Thanks!


Print Page | Close Window